Listed below are the parts that make up the plow mounts, frames and blades for Polaris RANGER vehicles. Included are diagrams and the part numbers for spare part kits. Each diagram and parts listing is specific to that particular mount, frame or blade.
To order a replacement part for any aspect of your plow system, see your authorized Polaris Dealer. To determine if a mount, frame or blade fits your RANGER, visit the Accessories section of the RANGER website.
MOUNTS
Glacier Pro HD Plow Mount (Part Number 2879106)
For more information, view the installation instructions.
The following table lists the parts included in the plow mount kit, as well as which spare kits replacements can be found in. The numbers in the table correspond to the above diagram.
Item | Description | Hardware Kit (2204832) |
Lift Rod Kit (2204974) |
1 | Mount Plate | — | — |
2 | Front Grille | — | — |
3 | Lift Rod | — | 1x |
4 | Support | 2x | — |
5 | M10-1.5 x 35mm Hex Bolt | 2x | — |
6 | M12-1.75 x 30mm Hex Bolt | 4x | — |
7 | M10-1.5 Nylock Flange Nut | 2x | — |
8 | M12-1.75 Nylock Nut | 4x | — |
The Hardware Kit (part number 2204832) and Lift Rod Kit (2204974) contain replacement parts. They can be ordered through your Polaris Dealer.
Mid-Size Glacier Pro HD Plow Mount (Part Number 2880261)
For more information, view the installation instructions and adjustment procedures.
The following table lists the parts included in the plow mount kit as well as which spare kits contain replacements. The numbers in the table correspond to the above diagram.
Item | Description | Plow Kit (2880261) |
Plow Release Handle Kit (2204828) |
Mount Plate Kit (2879105) |
Plow Mount Hardware Kit (2204831) |
Grille Kit (5257056) |
Winch Link Kit (2205057) |
Mid Mount Kit (2205418) |
1 | Button Head Socket Cap Screw, M6- 1.0 x 20mm |
2x | 2x | — | — | — | — | — |
2 | Flat Washer, M6 |
2x | 2x | — | — | — | — | — |
3 | Hexagonal Bolt M10- 1.5 x 30 |
2x | 2x | — | — | — | — | — |
4 | Hexagonal Bolt, M10- 1.5 x 35 |
3x | — | 3x | 3x | — | — | — |
5 | Hexagonal Bolt, M12- 1.75 x 30 |
4x | — | 4x | 4x | — | — | — |
6 | Nylon Nut, M10-1.5 |
1x | — | — | — | — | 1x | — |
7 | Nylon Nut, M12-1.75 |
4x | — | 4x | 4x | — | — | — |
8 | Nylon Nut, M6-1.0 |
2x | 2x | — | — | — | — | — |
9 | Welded Mount Plate |
1x | — | 1x | — | — | — | — |
10 | Threaded Support |
1x | — | 1x | 1x | — | — | — |
11 | Tension Spring |
2x | 2x | — | — | — | — | — |
12 | Hook Bushing |
2x | 2x | — | — | — | — | — |
13 | Handle | 1x | 1x | — | — | — | — | — |
14 | Right Hook Assembly |
1x | 1x | — | — | — | — | — |
15 | Left Hook Assembly |
1x | 1x | — | — | — | — | — |
16 | Hook Shim | 2x | 2x | — | — | — | — | — |
17 | Hook Up | 1x | — | — | — | — | — | 1x |
18 | Mid-Size Winch Link |
1x | — | — | — | — | 1x | — |
19 | Grille | 1x | — | 1x | — | 1x | — | — |
20 | Lock Washer, M10 |
5x | — | 5x | 5x | — | — | — |
21 | Handle Sleeve |
2x | 2x | — | — | — | — | — |
Replacement parts are available by purchasing the Plow Release Handle Kit (part number 2204828), Mount Plate Kit (part number 2879105), Plow Mount Hardware Kit (2204831), Grille Kit (5257056), Winch Link Kit (2205057) or Mid-Mount Kit (2205418). To order a kit, see your Polaris Dealer.
Plow Release Handle Kit (2204828):
Plow Mount Hardware Kit (2204831):
Mount Plate Kit (2879105):
Grille Kit (5257056):
Winch Link Kit (2205057):
Mid Mount Kit (2205057):
Glacier HD Plow Mount (Part Number 2879105)
For more information, view the installation instructions.
The following table lists the parts included in the plow mount kit and in which spare kits replacements can be found. The numbers in the table correspond to the above diagram.
Item | Description | Hardware Kit (2204831) | Lift Rod Kit (2204974) | Front Grille Kit (5257056) |
1 | Mount Plate |
— | — | — |
2 | Front Grille | — | — | 1x |
3 | Lift Rod | — | 1x | — |
4 | Support | 2x | — | — |
5 | Threaded Support |
1x | — | — |
6 | M10-1.5 x 35mm Hex Bolt |
3x | — | — |
7 | M12-1.75 x 30mm Hex Bolt |
4x | — | — |
8 | M12-1.75 Nylock Nut |
4x | — | — |
9 | M10 Lock Washer |
3x | — | — |
To purchase either the Hardware Kit (part number 2204831), Lift Rod Kit (part number 2204974) or Front Grille Kit (part number 5257056), see your Polaris Dealer.
FRAMES
Glacier Pro HD Plow Frame (Part Number 2883255)
For more information, view the installation instructions.
The following table lists the parts included in the plow frame kit, as well as the spare kits in which replacements can be found. The numbers in the table correspond to the above diagram.
Item | Description | Push Frame Hardware Kit (2204826) |
Angle Selection Kit (2204827) |
Pivot Hardware Kit (2204830) |
Kickstand Kit (2204833) |
Clevis Pin Kit (2204892) | Release Handle Kit (2204828) |
Angle Selection "T" Pin (2204829) |
Push Frame (2206049) |
Hook Up (2205129) |
Pivot (2206050) |
Lift Link (2204974) |
1 | Button Head Socket Cap Screw, M6- 1.0 x 20mm |
2x | — | — | — | — | 2x | — | — | — | — | — |
2 | Cotter Pin, 2mm x 10mm |
1x | — | — | 1x | — | — | — | — | — | — | — |
3 | Cotter Pin, 3mm x 25mm |
4x | 3x | — | — | 2x | — | — | — | — | — | — |
4 | Cotter Pin, 4mm x 30mm |
1x | — | — | — | — | — | — | — | — | — | — |
5 | Flat Washer, M6 ID x 12mm OD |
1x | — | — | 1x | — | — | — | — | — | — | — |
6 | Flat Washer, M6 ID x 18mm OD |
2x | — | — | — | — | 2x | — | — | — | — | — |
7 | Flat Washer, M8 ID x 24mm OD |
1x | — | — | 1x | — | — | — | — | — | — | — |
8 | Flat Washer, 14mm ID x 28mm OD |
— | 2x | — | — | — | — | — | — | — | — | — |
9 | Hex Bolt, M8-1.25 x 16mm |
1x | — | — | 1x | — | — | — | — | — | — | — |
10 | Hex Bolt, M10-1.5 x 25mm |
2x | — | — | — | — | 2x | — | — | — | — | — |
11 | Hex Bolt, M10-1.5 x 30mm |
2x | — | 2x | — | — | — | — | — | — | — | — |
12 | Hex Bolt, M12-1.75 x 45mm |
— | — | 2x | — | — | — | — | — | — | — | — |
13 | Hex Bolt, M6-1.0 x 20mm |
1x | — | — | 1x | — | — | — | — | — | — | — |
14 | Hex Bolt, M8-1.25 x 20mm |
2x | — | — | 2x | — | — | — | — | — | — | — |
15 | Nut, M12- 1.75 |
1x | — | — | 1x | — | — | — | — | — | — | — |
16 | Nylock Nut, M6-1.0 |
4x | — | — | 2x | — | 2x | — | — | — | — | — |
17 | Nylock Nut, M8-1.25 |
2x | — | — | 2x | — | — | — | — | — | — | — |
18 | Nylock Nut, M10-1.5 |
2x | — | 4x | — | — | — | — | — | — | — | — |
19 | Nylock Nut, M12-1.75 |
4x | — | 4x | — | — | — | — | — | — | — | — |
20 | M10 Lock Washer |
2x | — | — | — | — | 2x | — | — | — | — | — |
21 | Spring Pin, 4mm x 16mm |
1x | — | — | 1x | — | — | — | — | — | — | — |
22 | M8 Spring Lock Washer, 14.8 x 2mm |
1x | — | — | 1x | — | — | — | — | — | — | — |
23 | Tension Spring, 13mm x 58mm |
— | — | — | — | — | 2x | — | — | — | — | — |
24 | Rubber Bushing |
— | 2x | — | — | — | — | — | — | — | — | — |
25 | Exhaust Spring, 16mm x 63mm |
— | — | — | 1x | — | — | — | — | — | — | — |
26 | Blade Stopper |
— | — | 2x | — | — | — | — | — | — | — | — |
27 | Plow Spring | — | — | — | — | — | — | — | — | — | — | — |
28 | Angling Handle |
— | 1x | — | — | — | — | — | — | — | — | — |
29 | Angling Outer Tube |
— | 1x | — | — | — | — | — | — | — | — | — |
30 | Angling Inner Tube |
— | 1x | — | — | — | — | — | — | — | — | — |
31 | Shear Lock | — | 2x | — | — | — | — | 1x | — | — | — | — |
32 | Rubber Stopper |
— | 1x | — | — | — | — | — | — | — | — | — |
33 | Pivot Member |
— | — | — | — | — | — | — | — | — | 1x | — |
34 | Eyebolt Holder |
2x | — | 2x | — | — | — | — | — | — | — | — |
35 | Eyebolt Flange Bushing |
2x | — | 2x | — | — | — | — | — | — | — | — |
36 | Pivot Sleeve |
2x | — | 2x | — | — | — | — | — | — | — | — |
37 | Eyebolt Washer |
2x | — | 2x | — | — | — | — | — | — | — | — |
38 | Stopper Sleeve |
— | 1x | — | — | — | — | — | — | — | — | — |
39 | Tension Spring |
— | 2x | — | — | — | — | — | — | — | — | — |
40 | Hook Up | — | — | — | — | — | — | — | — | 1x | — | — |
41 | Handle | — | — | — | — | — | 1x | — | — | — | — | — |
42 | Handle Sleeve |
2x | — | — | — | — | 2x | — | — | — | — | — |
43 | Hook Shim | 2x | — | — | — | — | 2x | — | — | — | — | — |
44 | Hook Bushing |
2x | — | — | — | — | 2x | — | — | — | — | — |
45 | Right Hook Assembly |
— | — | — | — | — | 1x | — | — | — | — | — |
46 | Left Hook Assembly |
— | — | — | — | — | 1x | — | — | — | — | — |
47 | Pedal | — | — | — | 1x | — | — | — | — | — | — | — |
48 | Kickstand Clamp |
— | — | — | 1x | — | — | — | — | — | — | — |
49 | Auto- Release Linkage |
— | — | — | 1x | — | — | — | — | — | — | — |
50 | Auto- Release Arm |
— | — | — | 1x | — | — | — | — | — | — | — |
51 | Plastic Cup | — | — | — | 1x | — | — | — | — | — | — | — |
52 | Auto- Release Link |
— | — | — | 1x | — | — | — | — | — | — | — |
53 | Kickstand Spring |
— | — | — | 1x | — | — | — | — | — | — | — |
54 | Kickstand Shoe |
1x | — | — | 1x | — | — | — | — | — | — | — |
55 | Kickstand Lock |
— | — | — | 1x | — | — | — | — | — | — | — |
56 | Short Angling Pin |
1x | 1x | — | — | 1x | — | — | — | — | — | — |
57 | Long Angling Pin |
1x | 2x | — | — | 1x | — | — | — | — | — | — |
58 | Winch Link Pin |
1x | — | — | — | — | — | — | — | — | — | — |
59 | Main Pin | 1x | — | — | — | — | — | — | — | — | — | — |
60 | Hook Up Pin |
2x | — | — | — | — | — | — | — | — | — | — |
61 | Handle Angling Pin |
1x | 1x | — | — | — | — | — | — | — | — | — |
62 | "R" Pin Short Zinc Plated |
2x | 1x | — | — | — | — | — | — | — | — | — |
63 | Glacier Pro UTV V2 |
— | — | — | — | — | — | — | 1x | — | — | — |
64 | Red Polyethylene Handle |
— | 1x | — | — | — | — | — | — | — | — | — |
65 | Eyebolt, M10-1.5 x 110mm |
— | — | 2x | — | — | — | — | — | — | — | — |
66 | Plastic Cap | — | — | — | 1x | — | — | — | — | — | — | — |
67 | Winch Link, Welded Asm |
— | — | — | — | — | — | — | — | — | — | 1x |
Replacement parts can be found in the Pushframe Hardware Kit (part number 2204826), Angle Selection Kit (part number 2204827), Pivot Hardware Kit (part number 2204830), Kickstand Kit (part number 2204833), Clevis Pin Kit (part number 2204892), Release Handle Kit (part number 2204828), Angle Selection "T" Pin (part number 2204829), Pivot Kit (part number 2206050), Hook Up Kit (part number 2205129), Plow Spring Kit (part number 2858534), Pushframe Kit (part number 2206049), Plow Link Kit (part number 2204974). To order a kit, see your Polaris Dealer.
Pushframe Hardware Kit (2204826):
Angle Selection Kit (2204827):
Pivot Hardware Kit (2204830):
Kickstand Kit (2204833):
Clevis Pin Kit (2204892):
Release Handle Kit (2204828):
Pivot (2206050):
Hook Up (2205129):
Plow Spring (2858534):
Pushframe (2206049):
Plow Link (2204974):
Angle Selection "T" Pin (2204829):
In the event of a collision with an obstacle at a speed greater than what the system is rated for, the angle selection T-Pin of the manual angulation mechanism is designed to shear to minimize the force of impact to the pushframe.
If the angle selection T-pin is broken, inspect all components of the plow system to see if any other system components have been damaged. If a part is damaged, the impact speed was greater than what the system is designed to support. You must then buy a replacement from your dealer.
Should you need to replace the angle selection T-Pin, a spare pin is provided in the angle lever. Follow the steps below to change your T-Pin:
1. Remove the R-Pin (62) and the clevis pin (61) that keep the angle lever (28) in place.
2. Lift the angle lever and remove the spare T-Pin (31).
3. Remove the two tension springs (39) retaining the T-Pin.
4. Remove the two pieces of broken T-Pin.
5. Insert the new T-Pin.
6. Replace the angle lever.
7. Reinstall the clevis pin and the R-Pin.
8. Reinstall the two tension springs.
Important Notes: Visit your Authorized Polaris Dealer to order a new T-Pin, part number 2204829, and replace the original spare you just removed in the event of an additional hard impact failure. The T-Pin is designed only to protect against the impacts affecting right and left ends of the blade. The T-Pin does not protect the system from a central impact. Always inspect the entire system in the event of a hard impact to ensure that no damage occurred to any system components other than the T-Pin.
Mid-Size Glacier Pro HD Push Frame (Part Number 2880260)
For more information, view the instructions, which include installation as well as operation adjustment and procedures.
The following table lists the frame's parts, as well as in which spare kits they can be found. The numbers in the table correspond to the above diagram.
Item | Description | Plow Kit (2880260) |
Shear Pin Kit (2205527) |
Kickstand Kit (2205534) |
Bumper Kit (2205529) | Plow Pivot Kit (2205530) | Angle Selector Kit (2205528) | Pins Kit (2205526) | Angle Pin Kit (2205068) | Plow Spring Kit (2205382) | Blade Parts Kit (2205380) |
1 | Rivet 4.8mm x 19mm |
4x | — | — | 4x | 4x | — | — | — | — | — |
2 | Carriage Bolt, M10- 1.5 x 30mm |
2x | — | — | — | — | — | — | — | — | 2x |
3 | Clevis Pin, Ø14mm x 45mm |
1x | — | — | — | — | 1x | 1x | 1x | — | — |
4 | Clevis Pin, Ø14mm x 60mm |
1x | — | — | — | — | 1x | 1x | 1x | — | — |
5 | Clevis Pin, Ø16mm x 40mm |
2x | — | — | — | — | — | 2x | — | — | — |
6 | Clevis Pin, Ø20mm x 115mm |
1x | — | — | — | — | — | 1x | — | — | — |
7 | Cotter Pin, Ø3 x 25mm |
5x | — | — | — | — | 2x | 5x | 2x | — | — |
8 | Fender Washer, M6 |
1x | — | — | 1x | — | — | — | — | — | — |
9 | Flat Washer, M6 |
1x | — | 1x | — | — | — | — | — | — | — |
10 | Hexagonal Bolt, M12 x 1.75 x 40 |
2x | — | — | — | — | — | — | — | — | 2x |
11 | Hexagonal Bolt, M6-1.0 x 20 |
2x | — | 2x | — | — | — | — | — | — | — |
12 | Hexagonal Nut, M12 x 1.75 |
1x | — | 1x | — | — | — | — | — | — | — |
13 | Hexagonal Nylon Nut, M10-1.5 |
2x | — | — | — | — | — | — | — | — | 2x |
14 | Hexagonal Nylon Nut, M6-1.0 |
2x | — | 2x | — | — | — | — | — | — | — |
15 | Hexagonal Nylon Nut, M8-1.25 |
3x | — | — | 1x | — | — | — | — | — | 2x |
16 | Hexagonal Nylon Nut, M12-1.75 |
2x | — | — | — | — | — | — | — | — | 2x |
17 | Lock Washer, M6 |
1x | — | 1x | — | — | — | — | — | — | — |
18 | Socket Head Cap Screw, M8-1.25 x 60mm |
1x | — | — | 1x | — | — | — | — | — | — |
19 | Socket Head Cap Screw, M6-1 x 18mm |
1x | — | 1x | — | — | — | — | — | — | — |
20 | Pivot Sleeve | 2x | — | — | — | — | — | — | — | — | 2x |
21 | Tension Spring |
2x | — | — | — | — | 2x | 2x | — | — | — |
22 | Kickstand Spring |
1x | — | 1x | — | — | — | — | — | — | — |
23 | "R" Pin Short | 1x | — | — | — | — | 1x | 1x | — | — | — |
24 | Impact Stopper |
1x | — | — | 1x | — | — | — | — | — | — |
25 | 4 Position Bloc |
2x | — | — | — | — | — | — | — | — | 2x |
26 | Trip Spring | 2x | — | — | — | — | — | — | — | 2x | — |
27 | Trip Stopper | 2x | — | — | 2x | 2x | — | — | — | — | — |
28 | Clevis Pin, Ø8mm x 45mm |
1x | — | — | — | — | 1x | 1x | — | — | — |
30 | Angle Lever | 1x | — | — | — | — | 1x | — | — | — | — |
31 | Angling Outer Tube |
1x | — | — | — | — | 1x | — | — | — | — |
32 | Slide Bar | 1x | — | — | — | — | 1x | — | — | — | — |
33 | Shear Pin | 1x | 1x | — | — | — | 1x | 1x | — | — | — |
34 | Pin (Mid-Size) |
1x | — | — | — | — | 1x | 1x | — | — | — |
35 | Rubber Stopper |
1x | — | — | 1x | — | 1x | — | — | — | — |
36 | Cap | 1x | — | 1x | 1x | — | — | — | — | — | — |
37 | Pivot | 1x | — | — | — | 1x | — | — | — | — | — |
38 | Kickstand Shoe |
1x | — | 1x | — | — | — | — | — | — | — |
39 | Pedal | 1x | — | 1x | — | — | — | — | — | — | — |
40 | Compression Spring |
1x | — | 1x | — | — | — | — | — | — | — |
41 | Pedal Support |
1x | — | 1x | — | — | — | — | — | — | — |
42 | J Rod | 1x | — | 1x | — | — | — | — | — | — | — |
43 | Handle | 1x | — | — | — | — | 1x | 1x | — | — | — |
44 | Eye Bolt, M8-1.25 x 70 |
2x | — | — | — | — | — | — | — | — | 2x |
45 | Jam Nut | 1x | — | 1x | — | — | — | — | — | — | — |
Spare parts can be found in the Kickstand Kit (part number 2205534), Shear Pin Kit (part number 2205527), Bumper Kit (part number 2205529), Plow Pivot Kit (part number 2205530), Angle Selector Kit (part number 2205528), Pins Kit (part number 2205526), Angle Pin Kit (part number 2205068), Plow Spring Kit (part number 2205382), Blade Parts Kit (part number 2205380). To order a spare kit, see your Polaris Dealer.
Kickstand Kit (2205534):
Bumper Kit (2205529):
Plow Pivot Kit (2205530):
Angle Selector Kit (2205528):
Pins Kit (2205526):
Angle Pin Kit (2205068):
Shear Pin Kit (2205527):
In the event of a collision with an obstacle at a speed greater than that recommended for the system, the shear pin of the manual angle mechanism will break to minimize the force of impact in the frame.
If the shear pin is broken, inspect the plow system for damaged parts. If any part is damaged, the impact velocity was greater than what the system is designed to support. You must then buy a replacement part from your Polaris Dealer.
If only the shear pin is broken, the pin can be removed and installed upside down and used again. Follow these steps to change the pin:
1. Using a long nose pliers, remove the two tension springs (21) and then remove the pin (34) retaining the angle lever (30).
2. Remove the half-broken shear pin (33) and reinsert it upside down. You can get a new spare pin, part number 2205527, from your dealer.
3. Align the hole in the shear pin with the slot in the angle lever and insert the pin securing the parts in place.
4. Use a long nose pliers to reinstall the two tension springs completing the assembly.
Important notes: The shear pin is designed only to protect against the impacts affecting right and left ends of the plow. The pin does not protect the system from a center impact. Always inspect the entire plow system after a shear pin has failed to ensure no other components were damaged by the impact.
Glacier HD Plow Frame (Part Number 2882927)
For more information, view the instructions, which include installation as well as operation adjustment and procedures.
The following table lists the parts included in the plow frame kit, as well as the service kits that replacements can be found in. Identification numbers correspond to the above diagram. To order a kit, see your Polaris Dealer.
Item | Description | Quantity | Service Kit |
1 | Weld-Frame | 1 | — |
2 | Weld-Blade Support | 1 | — |
3 | Trip Spring | 2 | 2205382 |
4 | Eyebolt-M8 x 1.25 | 2 | 2207190 |
5 | Nut, Locking-M8 x 1.25 | 2 | 2207190 |
6 | Pivot Sleeve | 2 | 2207190 |
7 | Bolt, Pivot Sleeve- M12 x 1.75 x 40 |
2 | 2207190 |
8 | Nut, Locking-M12 x 1.75 | 2 | 2207190 |
9 | Winch Link | 1 | 2207385 |
10 | Nut, Locking-M10 x 1.5 | 1 | 2207385 |
11 | Clevis Pin, 20mm DIA. x 115mm |
1 | 2207190 |
12 | Cotter Pin | 4 | 2207190 2207384 2207385 |
13 | Lock Plate | 2 | 2207385 |
14 | Lock Pin | 2 | 2207385 |
15 | Lanyard | 2 | 2207385 |
16 | Lanyard Choke | 2 | 2207385 |
17 | Shear Pin | 1 | 2205527 |
18 | Handle, Shear Pin | 11 | 2207384 |
19 | Retaining Clip, Clevis Pin | 1 | 2207384 |
20 | Clevis Pin | 1 | 2207384 |
21 | Outer Tube, Angling | 1 | 2207384 |
22 | Slide Bar | 1 | 2207384 |
23 | Clevis Pin, 14mm DIA. x 45mm |
1 | 2207384 2207190 |
24 | Clevis Pin, 14mm DIA. x 60mm |
1 | 2207384 2207190 |
Lock & Ride Glacier II Pushframe (Part Number 2878822)
For more information, view the instructions, which include installation as well as operation adjustment and procedures.
The following table lists the parts included in the plow frame kit, as well as the service kits that replacements can be found in. Identification numbers correspond to the above diagram. To order a kit, see your Polaris Dealer.
Item | Description | Quantity | Service Kit |
1 | M12 Flat Washer | 6 | 2878825 |
2 | M8 Flat Washer | 2 | 2878825 |
3 | M12-1.75 x 90mm Hex Bolt | 1 | 2878825 |
4 | M10-1.5 x 30mm Hex Bolt | 2 | 2878825 |
5 | M12-1.75 x 50mm Hex Bolt | 2 | 2878825 |
6 | M8-1.25 x 25mm Hex Bolt | 5 | 2204642 |
7 | M8-1.25 x 65mm Hex Bolt | 2 | 2878825 |
8 | M10-1.5 Nylock Nut | 2 | 2878825 |
9 | M12-1.75 Nylock Nut | 3 | 2878825 |
10 | M8-1.25 Nylock Nut | 9 | 2878825 2204642 |
11 | 13mm dia x 58mm x 2.21 N/mm locking Arm Spring (not shown) |
1 | 2204642 |
12 | 41mm dia x 201mm Tension Spring | 2 | 2877443 |
13 | Adjustable Blade Stop | 2 | 2877504 |
14 | Latch | 2 | 2877450 |
15 | Exhaust Spring | 2 | 7042029 |
16 | 1/16-inch dia x 19.85-inch Cable | 1 | 2877452 |
17 | Pivot Sleeve (not shown) | 1 | 2878825 |
18 | Pushframe | 1 | 2204640 |
19 | Pivot | 1 | 2204641 |
20 | Locking Arm | 1 | 2204642 |
21 | Locking Arm Bracket | 1 | 2204642 |
22 | Safety Sticker | 1 | — |
23 | M8-1.25 x 60mm Eyebolt | 2 | 2878825 |
BLADES
Glacier Pro HD Plow Blade - 72-Inch Poly (Part Number 2879317)
For more information, view the installation instructions.
The following table lists the parts included in the plow blade kit as well as which spare kits replacements can be found in. The numbers in the table correspond to the above diagram. To order a kit, see your Polaris Dealer.
Item | Description | Plow Kit (2879317) |
Wear Bar Kit (2204976) |
Skid Shoe Kit (2205223) |
R-Pin Kit (2205494) |
72-Inch Skin Kit (2205375) |
Rubber Deflector Flap Kit (2858541) |
1 | R-Pin | 2x | — | 2x | 2x | — | — |
2 | Rivet | 21x | — | — | — | 21x | — |
3 | Cap Nut | 10x | — | — | — | — | 10x |
4 | Carriage Bolt-M8 x 1.25 x 20mm |
10x | — | — | — | — | 10x |
5 | Carriage Bolt-M8 x 1.25 x 25mm |
8x | 8x | — | — | — | — |
6 | Hexagonal Nut-M8 x 1.25, Self- Locking |
8x | 8x | — | — | — | — |
7 | Warning Decal |
1x | — | — | — | — | — |
8 | Rubber Snow Flap (72 Inches) |
1x | — | — | — | — | 1x |
9 | Rubber Flap Bracket (36 Inches) |
2x | — | — | — | — | 2x |
10 | Cutting Edge |
1x | 1x | — | — | — | — |
11 | Welded Plow/ Blade Framing (72 Inches) |
1x | — | — | — | — | — |
12 | Plastic Moldboard/ Polyethylene Blade (72 Inches) |
1x | — | — | — | 1x | — |
13 | Skid Shoe | 2x | — | 2x | — | — |
— |
Other accessory kits available for purchase are the Plow Markers Kit (part number 2872726), Curb Finder Kit (part number 2879872) and Hardened Wear Bar Kit (part number 2879875).
Glacier Pro HD Plow Blade - 72-Inch Steel (Part Number 2879874)
For more information, view the installation instructions.
The following table lists the parts included in the plow blade kit as well as the spare kits replacements can be found in. The numbers in the table correspond to the above diagram.
Item | Description | Wear Bar Kit (2204976) |
Skid Shoe Kit (2205223) |
R-Pin Kit (2205494) |
1 | Blade (72 Inches) | — | — | — |
2 | Wear Bar | 1x | — | — |
3 | Skid Shoe | — | 2x | — |
4 | M8-1.25 x 25mm Carriage Bolt |
8x | — | — |
5 | M8-1.25 Nylon Nut |
8x | — | — |
6 | R-Pin | — | 2x | 2x |
Spare parts can be obtained by purchasing the Wear Bar Kit (part number 2204976), Skid Shoe Kit (part number 2205223) or R-Pin Kit (part number 2205494). To order a kit, see your Polaris Dealer.
Other accessory kits available for purchase are the Plow Markers Kit (part number 2872726), Hardened Wear Bar Kit (part number 2879875) and Rubber Snow Deflector Flap Kit (part number 2858541).
Glacier Pro Plow Blade - 72-Inch Steel (Part Number 2880270)
For more information, view the installation instructions.
The follow table lists the parts included in the blade kit, as well as which spare kits the parts can be found in. The numbers in the table correspond to the above diagram.
Item | Description | Wear Bar Kit (2204976) |
Skid Shoe Kit (2205071) |
R-Pin Kit (2205070) |
1 | Blade | — | — | — |
2 | Wear Bar | 1x | — | — |
3 | Skid Shoe | — | 2x | — |
4 | Carriage Bolt -M8 x 1.25 x 25mm |
8x | — | — |
5 | Nylon Nut - M8 x 1.25 | 8x | — | — |
6 | R-Pin | — | 2x | 2x |
Replacement parts can be found in the Wear Bar Kit (part number 2879867), the Skid Shoe Kit (part number 2205071) and the R-Pin Kit (part number 2205070). To order a replacement kit, see your Polaris Dealer.
Glacier Pro Plow Blade - 66-Inch Poly (Part Number 2880269)
For more information, view the installation instructions.
The following table identifies the parts in the blade and which spare kits replacement parts can be found in. The numbers in the table correspond to the above diagram.
Item | Description | Wear Bar Kit (2879867) |
Skid Shoe Kit (2205071) |
R-Pin Kit (2205070) |
66-Inch Skin Kit (2205069) |
1 | R-pin (Hairpin Cotter Pin Zinc Plated 82mm Long - 4mm Wire Dia) |
— | 2x | 2x | — |
2 | Rivet (Blind Rivet Round Head Type Steel Black Zinc Plated Ø4.8mm x 13mm x 16mm Head) |
— | — | — | 30x |
3 | M8 x 1.25 x 25mm Carriage Bolt |
10x | — | — | — |
4 | M8 x 1.25 Self Locking Hexagonal Nut |
10x | — | — | — |
6 | Wear Bar | 1x | — | — | — |
7 | Blade Framing | — | — | — | — |
8 | Polyethylene Moldboard |
— | — | — | 1x |
9 | Plow Shoe | — | 2x | — | — |
Replacement parts can be found in the Wear Bar Kit (part number 2879867), the Skid Shoe Kit (part number 2205071), the R-Pin Kit (part number 2205070) and the 66-Inch Skin Kit (part number 2205069). To order a replacement kit, see your Polaris Dealer.
Other accessory kits that are available for purchase are the Plow Marker Kit (part number 2872726), the 66-Inch Hardened Wear Bar Kit (part number 2879868) and the 66-Inch Rubber Deflector Flap Kit (part number 2879866).
Glacier Pro Plow Blade - 66-Inch Steel (Part Number 2880268)
For more information, view the installation instructions.
The following table identifies the parts in the blade and which spare kits replacement parts can be found in. The numbers in the table correspond to the above diagram.
Item | Description | Wear Bar Kit (2879867) |
Skid Shoe Kit (2205071) |
R-Pin Kit (2205070) |
1 | Blade | — | — | — |
2 | Wear Bar | 1x | — | — |
3 | Skid Shoe | — | 2x | — |
4 | M8-1.25 x 25mm Carriage Bolt |
10x | — | — |
5 | M8-1.25 Nylon Nut | 10x | — | — |
6 | R-Pin | — | 2x | 2x |
Replacement parts can be found in the Wear Bar Kit (part number 2879867), the Skid Shoe Kit (part number 2205071) and the R-Pin Kit (part number 2205070). To order a replacement kit, see your Polaris Dealer.
Other accessory kits that are available for purchase are the Plow Marker Kit (part number 2872726), the Curb Finder Kit (part number 2879872), the 66-Inch Hardened Wear Bar Kit (part number 2879868) and the 66-Inch Rubber Deflector Flap Kit (part number 2879866).