Certain Polaris RANGER models can be equipped with Prospector Pro Tracks for all-terrain traction in winter weather. Listed below are the parts that make up the mounts and track kits for RANGER vehicles. Included are diagrams and the part numbers for spare part kits. Each diagram and parts listing is specific to that particular mount or track kit.
To order a replacement part for any aspect of your track system, see your authorized Polaris Dealer. If you need a part not listed, also consult your Polaris Dealer.
To ensure a mount or tracks kit is compatible with your RANGER, visit the accessories section of the RANGER website and use the fitment tool at the top of the page (seen below).
MOUNTS
Prospector Pro Track Mount Kit (Part Number 2879215)
The following tables and diagrams list the parts included in the kit. Identification numbers correspond to the diagrams above each table. For more information, view the installation instructions. To order a part or kit, see your Polaris Dealer.
Front:
| Item | Description | Quantity | Part Number | Hardware Kit |
| 1 | Large Ball Joint Spacer | 1 | 2875808 | — |
| 2 | Short Ball Joint Spacer | 1 | 2875809 | — |
| 3 | Spring Support | 1 | — | 2875810 |
| 4 | Sliding Rod | 1 | — | 2875810 |
| 5 | Anti-Rotation Frame | 1 | — | — |
| 6 | Tightening Sleeve | 1 | — | 2205003 |
| 7 | Front Anti-Rotation Spring | 1 | — | 2875810 |
| 8 | Rubber Bushing | 1 | — | 2875810 |
| 9 | Internal Front Sub-Table Clamping Plate | 1 | 2204994 | — |
| 10 | Front Right Sub-Table Front Left Sub-Table |
1 1 |
2204999 2204998 |
— — |
| 11 | External Front Right Sub-Table Clamping Plate External Front Left Sub-Table Clamping Plate |
1 1 |
2204997 2204996 |
— — |
| 12 | M12-1.5 Lug Nut | 4 | — | 2205005 |
| 13 | 3/8-inch nc x 4-1/4-inch Hex Bolt | 1 | — | 2205003 |
| 14 | 1/2-inch nf x 1-1/2-inch Hex Bolt | 1 | — | 2875810 |
| 15 | 1/2-inch nc x 3-inch Carriage Bolt | 1 | — | 2205003 |
| 16 | 3/8-inch nc x 2-3/4-inch Carriage Bolt | 3 | — | 2205003 |
| 17 | 1/2-inch nf Thin Nut | 1 | — | 2205003 |
| 18 | 3/8-inch nc Nylock Nut | 4 | — | 2205003 |
| 19 | 1/2-inch nc Nylock Nut | 1 | — | 2205003 |
| 20 | 3/8-inch dia Flat Washer | 1 | — | 2205003 |
| 21 | 3/4-inch ID x 2-inch OD x 1/8-inch Flat Washer | 1 | — | 2875810 |
| 22 | 1/2-inch dia x 1/2-inch nf Ball Joint | 1 | 2875859 | 2875810 |
Rear:
| Item | Description | Quantity | Part Number | Hardware Kit |
| 1 | Rubber Bushing | 3 | 2875816 | 2878133 |
| 2 | Bushing Spacer Tube | 1 | — | 2878133 |
| 3 | Rear Anti-Rotation Tube | 1 | 2203517 | — |
| 4 | Rear Right Sub-Table Plate Rear Left Sub-Table Plate |
1 1 |
2205002 2205001 |
— — |
| 5 | Retaining Sleeve | 2 | — | 2878133 |
| 6 | Rear Sub-Table Clamping Plate | 1 | 2204995 | — |
| 7 | M12-1.5 Lug Nut | 4 | — | 2205005 |
| 8 | Tightening Sleeve | 1 | — | 2878133 |
| 9 | 3/8-inch nc x 4-1/2-inch Hex Bolt | 1 | — | 2878133 |
| 10 | 3/8-inch nc x 9-inch Hex Bolt | 1 | — | 2878133 |
| 11 | 3/8-inch nc x 1-1/4-inch Carriage Bolt | 2 | — | 2878133 |
| 12 | 5/8-inch nc Nut | 1 | — | 2878133 |
| 13 | 3/8-inch nc Nylock Nut | 4 | — | 2878133 |
| 14 | 5/8-inch nc Nylock Nut | 1 | — | 2878133 |
| 15 | 3/8-inch dia Flat Washer | 1 | — | 2878133 |
| 16 | 3/4-inch ID x 2-inch OD x 1/8-inch Flat Washer | 1 | — | 2878133 |
| 17 | 50 mm OD x 17 mm ID x 3 mm Flat Washer | 2 | — | 2878133 |
Prospector Pro Track Mount (Part Number 2879524)
The following tables and diagrams list the parts included in the kit. Identification numbers correspond to the diagrams above each table. For more information, view the installation instructions. To order a part or kit, see your Polaris Dealer.
Front anchor bracket:
| Item | Description | Quantity | Part Number |
| 1 | Front Bracket Kit | 1 | 2205406 |
| 2 | Front Left Anchor Bracket | 1 | — |
| 3 | Front Right Anchor Bracket | 1 | — |
| 4 | Front Bracket Cover | 2 | — |
| 5 | Hex Bolt-HCS, M10-1.5 x 55, 8.8, ZP, DIN931 | 4 | — |
| 6 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Rear anchor bracket:
| Item | Description | Quantity | Part Number |
| 7 | Rear Bracket Kit | 1 | 2205410 |
| 8 | Rear Left Anchor Bracket | 1 | — |
| 9 | Rear Right Anchor Bracket | 1 | — |
| 10 | Rear Bracket Cover | 2 | — |
| 11 | Hex Bolt-HCS, M8-1.25 x 30, 8.8, ZP, DIN933 | 4 | — |
| 12 | Hex Bolt-HCS, M10-1.5 x 150, 8.8, ZP, DIN931 | 2 | — |
| 13 | Hex Bolt-HCS, 3/8-16 x 6, ZP, SAE J429 | 2 | — |
| 14 | Washer-W, 24 x 8.4 x 2, ZP, DIN9021 | 2 | — |
| 15 | Nylon Nut-NN, 3/8-16, 5, ZP, ASME B18.16.6 | 2 | — |
| 16 | Nylon Nut-FNN, M8-1.25, 8, ZP DIN6926 | 4 | — |
| 17 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 2 | — |
Steering limiter assembly:
| Item | Description | Quantity | Part Number |
| 18 | Steering Limiter Cable Assembly | 1 | 2205456 |
| 19 | Steering Limiter Cable | 2 | — |
| 20 | Hex Bolt-HCS, M10-1.5 x 60, 8.8, ZP, DIN931 | 2 | — |
| 21 | Step Spacer | 2 | — |
| 22 | Washer-W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 2 | — |
| 23 | Nylon Nut-NN, M10-1.5, ZP, 8, DIN982 | 2 | — |
Wheel lug nut:
| Item | Description | Quantity | Part Number |
| 24 | Wheel Lug Nut-LN, 3/8-24 x 15, 8, ZP | 16 | 2205457 |
Prospector Pro Track Mount (Part Number 2879621)
The following tables and diagrams list the parts included in the kit. Identification numbers correspond to the diagrams above each table. For more information, view the installation instructions. To order a part or kit, see your Polaris Dealer.
Front anchor bracket:
| Item | Description | Quantity | Part Number |
| 1 | Front Bracket Kit | 1 | 2205411 |
| 2 | Front Left Anchor Bracket | 1 | — |
| 3 | Front Left Bracket Cover | 1 | — |
| 4 | Front Right Anchor Bracket | 1 | — |
| 5 | Front Right Bracket Cover | 1 | — |
| 6 | Hex Bolt-HCS, M10-1.5 x 55, 8.8, ZP, DIN931 | 4 | — |
| 7 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Rear anchor bracket:
| Item | Description | Quantity | Part Number |
| 8 | Rear Bracket Kit | 1 | 2205412 |
| 9 | Rear Left Anchor Bracket | 1 | — |
| 10 | Rear Right Anchor Bracket | 1 | — |
| 11 | Hex Bolt-HCS, M8-1.25 x 60, 8.8, ZP, DIN931 | 2 | — |
| 12 | Hex Bolt-HCS, M12-1.75 x 240, 8.8, ZP, DIN931 | 2 | — |
| 13 | Bushing Spacer | 2 | — |
| 14 | Taper Bushing | 4 | — |
| 15 | Nylon Nut-FNN, M8-1.25, 8, ZP, DIN6926 | 2 | — |
| 16 | Nylon Nut-FNN, M12-1.75, 8, ZP, DIN6926 | 2 | — |
Steering limiter assembly:
| Item | Description | Quantity | Part Number |
| 17 | Steering Limiter Cable Assembly | 1 | 2205456 |
| 18 | Steering Limiter Cable | 2 | — |
| 19 | Hex Bolt-HCS, M10-1.5 x 60, 8.8, ZP, DIN931 | 2 | — |
| 20 | Step Spacer | 2 | — |
| 21 | Washer-W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 2 | — |
| 22 | Nylon Nut-NN, M10-1.5, ZP, 8, DIN982 | 2 | — |
Wheel lug nut:
| Item | Description | Quantity | Part Number |
| 23 | Wheel Lug Nut-LN, M12-1.5 x 14, 8, ZP | 16 | 2205458 |
Prospector Pro Track Mount (Part Number 2880058)
To order this accessory kit, see your Polaris Dealer.
The following tables and diagrams list the parts included in the kit. Identification numbers correspond to the diagrams above each table. For more information, view the installation instructions. To order a part or kit, see your Polaris Dealer.
Front anchor bracket:
| Item | Description | Quantity | Part Number |
| 1 | Front Bracket Kit | 1 | 2205395 |
| 2 | Front Left Anchor Bracket | 1 | — |
| 3 | Front Right Anchor Bracket | 1 | — |
| 4 | Front Bracket Cover | 2 | — |
| 5 | Hex Bolt-HCS, M10-1.5 x 55, 8.8, ZP, DIN931 | 4 | — |
| 6 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Rear anchor bracket:
| Item | Description | Quantity | Part Number |
| 7 | Rear Bracket Kit | 1 | 2205410 |
| 8 | Rear Left Anchor Bracket | 1 | — |
| 9 | Rear Right Anchor Bracket | 1 | — |
| 10 | Rear Bracket Cover | 2 | — |
| 11 | Hex Bolt-HCS, M8-1.25 x 30, 8.8, ZP, DIN933 | 4 | — |
| 12 | Hex Bolt-HCS, M10-1.5 x 150, 8.8, ZP, DIN931 | 2 | — |
| 13 | Hex Bolt-HCS, 3/8-16 x 6, ZP, SAE J429 | 2 | — |
| 14 | Washer-W, 24 x 8.4 x 2, ZP, DIN9021 | 2 | — |
| 15 | Nylon Nut-NN, 3/8-16, 5, ZP, ASME B18.16.6 | 2 | — |
| 16 | Nylon Nut-FNN, M8-1.25, 8, ZP, DIN6926 | 4 | — |
| 17 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 2 | — |
Wheel lug nut:
| Item | Description | Quantity | Part Number |
| 18 | Wheel Lug Nut-LN, 3/8-24 x 15.8, ZP | 16 | 2205457 |
Prospector Pro Track Mount (Part Number 2880071)
The following tables and diagrams list the parts included in the kit. Identification numbers correspond to the diagrams above each table. For more information, view the installation instructions. To order a part or kit, see your Polaris Dealer.
Front anchor bracket:
| Item | Description | Quantity | Part Number |
| 1 | Front Bracket Kit | 1 | 2205395 |
| 2 | Front Left Anchor Bracket | 1 | — |
| 3 | Front Right Anchor Bracket | 1 | — |
| 4 | Front Bracket Cover | 2 | — |
| 5 | Hex Bolt-HCS, M10-1.5 x 50, 8.8, ZP, DIN931 | 4 | — |
| 6 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Rear anchor bracket:
| Item | Description | Quantity | Part Number |
| 7 | Rear Bracket Kit | 1 | 2205369 |
| 8 | Anti-Rotation Rear Bracket | 2 | — |
| 9 | Rear Bracket Cover | 2 | — |
| 10 | Hex Bolt-HCS, M8-1.25 x 30, 8.8, ZP, DIN933 | 2 | — |
| 11 | Hex Bolt-HCS, M10-1.5 x 180, 8.8, ZP, DIN931 | 2 | — |
| 12 | Nylon Nut-FNN, M8-1.25, 8, ZP, DIN6926 | 2 | — |
| 13 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 2 | — |
Wheel lug nut:
| Item | Description | Quantity | Part Number |
| 14 | Wheel Lug Nut-LN, 3/8-24 x 15, 8, ZP | 16 | 2205457 |
Prospector Pro Track Mount (Part Number 2882783)
The following tables and diagrams list the parts included in the kits. Identification numbers correspond to the diagrams above each table. For more information, view the installation instructions. To order a part or kit, see your Polaris Dealer.
Front bracket kit (all items included in kit 2207199):
| Item | Description | Quantity |
| 1 | Front Left Anchor Bracket | 1 |
| 2 | Front Left Bracket Cover | 1 |
| 3 | Front Right Anchor Bracket | 1 |
| 4 | Front Right Bracket Cover | 1 |
| 5 | Hex Bolt-HCS, M10-1.5 x 50, 8.8, ZP, DIN931 | 4 |
| 6 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 |
Rear bracket kit (all items included in kit 2207200):
| Item | Description | Quantity |
| 7 | Rear Left Anchor Bracket | 1 |
| 8 | Rear Right Anchor Bracket | 1 |
| 9 | Hex Bolt-HCS, M8-1.25 x 60, 10.9, ZP, DIN931 | 2 |
| 10 | Hex Bolt-HCS, M12-1.75 x 260, 8.8, ZP, DIN931 | 2 |
| 11 | Bushing Spacer | 2 |
| 12 | Taper Bushing | 4 |
| 13 | Nylon Nut-FNN, M8-1.25, 8, ZP, DIN6926 | 2 |
| 14 | Nylon Nut-FNN, M12-1.75, 8, ZP, DIN6926 | 2 |
Steering limiter kit:
| Item | Description | Quantity | Hardware Kit |
| 15 | Steering Limiter Mounting Disk | 2 | 2205456 |
| 16 | Steering Limiter Cable | 2 | 2205456 |
| 17 | Hex Bolt-HCS, M10-1.5 x 60, 8.8, ZP, DIN931 | 2 | 2205456 |
| 18 | Hex Bolt-HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 2 | 2205456 |
| 19 | Step Spacer | 2 | 2205456 |
| 20 | Washer-W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 2 | 2205456 |
| 21 | Nylon Nut-NN, M10-1.5, ZP, 8, DIN982 | 2 | 2205456 |
| 22 | Support Plate | 2 | 2205456 |
Wheel lug nut kit:
| Item | Description | Quantity | Part Number |
| 23 | Wheel Lug Nut-LN, M12-1.5 x 14, 8, ZP | 16 | 2205458 |
Prospector Pro Track Mount Kit (Part Number 2889425 and Part Number 2889426)
The following tables and diagrams list the parts included in the kit. Identification numbers correspond to the diagrams above each table. For more information, view the kit instructions. To order a part or kit, see your Polaris Dealer.
Front Anchor Bracket (Option 1):
| Ref | Qty. | Part Description | Part Number |
| 1 | 1 | Front Bracket Kit | 2209226 |
| 2 | 2 | Front Anchor Bracket | - |
| 3 | 2 | Front Bracket Cover | - |
| 4 | 2 | Hex Bolt - HCS, M10-1.5X55, 10.9, ZP, DIN931 | - |
| 5 | 2 | Carriage Bolt - CB, M10-1.5X60, 8.8, ZP, DIN603 | - |
| 6 | 2 | Carriage Bolt - CB, M10-1.5X100,8.8, ZP, DIN603 | - |
| 7 | 4 | Taper Sleeve | - |
| 8 | 4 | Nylon Nut - FNN, M10-1.5, 8, ZP, DIN6926 | - |
Front Anchor Bracket (Option 2):
| Ref | Qty. | Part Description | Part Number |
| 1 | 1 | Front Bracket Kit | 2209227 |
| 2 | 2 | Front Anchor Bracket | - |
| 3 | 2 | Front Bracket Cover | - |
| 4 | 2 | Hex Bolt - HCS, M10-1.5X55, 10.9, ZP, DIN931 | - |
| 5 | 2 | Carriage Bolt - CB, M10-1.5X60, 8.8, ZP, DIN603 | - |
| 6 | 2 | Carriage Bolt - CB, M10-1.5X100,8.8, ZP, DIN603 | - |
| 7 | 4 | Taper Sleeve | - |
| 8 | 4 | Nylon Nut - FNN, M10-1.5, 8, ZP, DIN6926 | - |
Rear Anchor Bracket:
| Ref | Qty. | Part Description | Part Number |
| 9 | 1 | Rear Bracket Kit | 2208849 |
| 10 | 1 | Rear Left Anchor Bracket | - |
| 11 | 1 | Rear Right Anchor Bracket | - |
| 12 | 2 | Hex Bolt - HCS, M8-1.25X60,10.9,ZP,DIN931 | - |
| 13 | 2 | Hex Bolt - HCS, M12-1.75x190, 8.8, ZP, DIN931 | - |
| 14 | 2 | Bushing 1-1/2 0.410IDX0.625ODx1.50L YZN | - |
| 15 | 2 | Taper Bushing | - |
| 16 | 2 | Nylon Nut - FNN, M8-1.25,8,ZP,DIN6926 | - |
| 17 | 2 | Nylon Nut - FNN, M12-1.75, 8, ZP, DIN6926 | - |
Steering Limiter Assembly:
| Ref | Qty. | Part Description | Part Number |
| 18 | 1 | Steering Limiter Cable Assembly | 2205456 |
| 19 | 2 | Steering Limiter Mounting Disk | - |
| 20 | 2 | Steering Limiter Cable | - |
| 21 | 2 | Hex Bolt - HCS, M10-1.5X60, 8.8, ZP, DIN931 | - |
| 22 | 2 | Hex Bolt - HCSW, M10-1.5X25, 8.8, ZP, TL, DIN933 | - |
| 23 | 2 | Step Spacer | - |
| 24 | 2 | Washer - W, 7/16X1.0X0.072, 8, ZP, USS | - |
| 25 | 2 | Nylon Nut - NN, M10-1.5, ZP, 8, DIN982 | - |
Wheel Lug Nut:
| Ref | Qty. | Part Description | Part Number |
| 25 | 16 | Wheel Lug Nut-LN, M12-1.5X14, 8, ZP | 2205458 |
Prospector Pro Track Mount (Part number 2889069 - Discontinued)
The following tables and diagrams list the parts included in the kit. Identification numbers correspond to the diagrams above each table. For more information, view the kit instructions. To order a part or kit, see your Polaris Dealer.
Front Anchor Bracket:
| Item | Description | Quantity | Part Number |
|---|---|---|---|
| 1 | Front Bracket Kit | 1 | 2208848 |
| 2 | Front Anchor Bracket | 1 | - |
| 3 | Front Bracket Cover | 1 | - |
| 4 | Hex Bolt - HCS, M10-1.5X55, 10.9, ZP, DIN931 | 2 | - |
| 5 | Carriage Bolt - CB, M10-1.5X60, 8.8, ZP, DIN603 | 4 | - |
| 6 | Taper Sleeve | 4 | - |
| 7 | Nylon Nut - FNN, M10-1.5, 8, ZP, DIN6926 | 6 | - |
Rear Anchor Bracket:
| Item | Description | Quantity | Part Number |
|---|---|---|---|
| 8 | Rear Bracket Kit | 1 | 2208849 |
| 9 | Rear Left Anchor Bracket | 1 | - |
| 10 | Rear Right Anchor Bracket | 1 | - |
| 11 | Hex Bolt - HCS, M8-1.25X60, 10.9, ZP, DIN931 | 2 | - |
| 12 | Hex Bolt - HCS, M12-1.75X190, 8.8, ZP, DIN931 | 2 | - |
| 13 | Bushing 1-1/2 0.41IDX0.625ODx1.50L YZN | 2 | - |
| 14 | Taper Bushing | 2 | - |
| 15 | Nylon Nut - FNN, M8-1.25, 8, ZP, DIN6926 | 2 | - |
| 16 | Nylon Nut - FNN, M12-1.75, 8, ZP, DIN6926 | 2 | - |
Steering Limiter Assembly:
| Item | Description | Quantity | Part Number |
|---|---|---|---|
| 17 | Steering Limiter Cable Assembly | 1 | 2205456 |
| 18 | Steering Limiter Mounting Disk | 2 | - |
| 19 | Steering Limiter Cable | 2 | - |
| 20 | Hex Bolt - HCS, M10-1.5X60, 8.8, ZP, DIN931 | 2 | - |
| 21 | Hex Bolt - HCSW, M101.5X25, 8.8, ZP, TL, DIN933 | 2 | - |
| 22 | Step Spacer | 2 | - |
| 23 | Washer - W, 7/16X1.0X0.072, 8, ZP, USS | 2 | - |
| 24 | Nylon Nut - NN, M10-1.5, ZP, DIN982 | 2 | - |
Wheel Lug Nut:
| Item | Description | Quantity | Part Number |
|---|---|---|---|
| 25 | Wheel Lug Nut-LN, M12-1.5X14, 8, ZP | 16 | 2205458 |
TRACKS
Prospector Pro Tracks (Part Numbers Part Number 2880757 and Part Number 2883313)
For more information, view the User Manual, which applies to multiple models. The User Manual includes installation instructions, adjustment procedures, break-in information, maintenance tips, torque specifications and troubleshooting solutions.
The following tables and diagrams list the parts included in the kits. Identification numbers and letters correspond to the diagrams above each table. To order a part or kit, see your Polaris Dealer.
| Item | Description | Quantity | Part Number |
| A | Kit-Frame, Camoplast®, FL, UTV | 1 | 2205439 |
| 1 | LH Front Frame - UTV | 1 | — |
| 2 | Tensioner - UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8-1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8-1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker-Polaris UTV | 1 | — |
| 18 | Track Guide Front - UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205124 |
| Item | Description | Quantity | Part Number |
| B | Kit-Frame, Camoplast®, FR, UTV | 1 | 2205440 |
| 1 | RH Front Frame - UTV | 1 | — |
| 2 | Tensioner - UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8-1.25 x 70, 10.9, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8-1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod-Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker-Polaris UTV | 1 | — |
| 18 | Track Guide Front-UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205124 |
| Item | Description | Quantity | Part Number |
| C | Kit-Frame, Camoplast®, RL, UTV | 1 | 2205441 |
| 1 | LH Rear Frame-UTV | 1 | — |
| 2 | Tensioner-UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8-1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8-1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod-Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker-Polaris UTV | 1 | — |
| 18 | Track Guide Rear-UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205124 |
| Item | Description | Quantity | Part Number |
| D | Kit-Frame, Camoplast®, RR, UTV | 1 | 2205442 |
| 1 | RH Rear Frame-UTV | 1 | — |
| 2 | Tensioner-UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8-1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8-1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod-Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker-Polaris UTV | 1 | — |
| 18 | Track Guide Rear-UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205124 |
| Item | Description | Quantity | Part Number |
| E | Kit-Sprocket, Camoplast®, 18 Tooth | 1 | 2205433 |
| 1 | Sprocket 18 Tooth - Camoplast® XP | 1 | — |
| 2 | HFSCS, M10-1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
| Item | Description | Quantity | Part Number |
| F | Kit-Sprocket, Camoplast®, 20 Tooth | 1 | 2205432 |
| 1 | Sprocket-Camoplast® XP, 20 Tooth | 1 | — |
| 2 | HFSCS, M10-1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
| Item | Description | Quantity | Part Number |
| G | Kit-Hub, Camoplast®, 32 mm | 1 | 2205435 |
| 1 | Hub-Camoplast® XP 32 mm, Assembly | 1 | — |
| 2 | HFSCS, M10-1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
| 3 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| Item | Description | Quantity | Part Number |
| H | Kit-Wheel. Camoplast®, Mid, UTV | 1 | 2205127 |
| 1 | HD Wheel Assembly - 132 mm x 50 mm | 1 | — |
| 2 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 3 | HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 1 | — |
| Item | Description | Quantity | Part Number |
| i | Kit-Wheel, Camoplast®, Idler, UTV | 1 | 2205447 |
| 1 | Wheel Assembly-UTV 241 mm | 1 | — |
| 2 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 3 | HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 1 | — |
| Item | Description | Quantity | Part Number |
| J | Kit-Rocker, Camoplast®, Outer, UTV | 1 | 2205446 |
| 1 | UTV Stabilizer Assembly Male | 1 | — |
| 2 | Wheel Assembly - 132 mm x 50 mm UTV | 2 | — |
| 3 | 2 Lips Cap, 2-inch OD Tube | 2 | — |
| 4 | HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 2 | — |
| 5 | Urethane Cone, Stabilizer | 1 | — |
| Item | Description | Quantity | Part Number |
| K | Kit-Rocker, Camoplast®, Inner, UTV | 1 | 2205126 |
| 1 | UTV Stabilizer Female Assembly | 1 | — |
| 2 | Dust Cap, Stabilizer | 1 | — |
| 3 | HCS, M10-1.5 x 45, 10.9, ZP, TL, DIN931 | 1 | — |
| 4 | Tandem T Bushing | 1 | — |
| 5 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 6 | Urethane Cone, Stabilizer | 1 | — |
| 7 | TW, 1-inch x 5/8-inch x 1/16-inch | 2 | — |
| Item | Description | Quantity | Part Number |
| L | Kit-Bearings, Camoplast®, UTV | 1 | 2205124 |
| 1 | Spacer-UTV | 1 | — |
| 2 | Bearing-6007 | 3 | — |
| 3 | Shaft Seal-50 x 62 x 10 TC | 1 | — |
| Item | Description | Quantity | Part Number |
| M | Kit-Track Adjuster, Camoplast®, UTV | 1 | 2205445 |
| 1 | Tensioner-UTV | 1 | — |
| 2 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 3 | Steel Cap Nut | 1 | — |
| 4 | HFCS, M8-1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 5 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 6 | Tensioner Bushing | 1 | — |
| 7 | FNN, M8-1.25, 8, ZP, DIN6926 | 1 | — |
| 8 | Tensioner Rod-Hex Nut Assembly | 1 | — |
| 9 | Sticker-Alignment | 1 | — |
| Item | Description | Quantity | Part Number |
| N | Kit-Hyfax, Camoplast®, Front, UTV | 1 | 2205443 |
| 1 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 2 | Track Guide Front | 1 | — |
| Item | Description | Quantity | Part Number |
| O | K-Hyfax, Camoplast®, Rear, UTV | 1 | 2205444 |
| 1 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 2 | Track Guide Rear | 1 | — |
| Item | Description | Quantity | Part Number |
| P | Kit - Anti-Rotation, FRT, UTV | 1 | 2205436 |
| 1 | Short Anti-Rotation Tubing Weldment | 1 | — |
| 2 | HCS, M10-1.5 x 60, 10.9, ZP, DIN931 | 1 | — |
| 3 | HFSCS, M12-1.75 x 50, 8.8, ZP, DIN6921 | 1 | — |
| 4 | X-Long Rod End | 1 | — |
| 5 | Rod End Spacer | 2 | — |
| 6 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 7 | W, 37 x 13 x 3, ZP, DIN9021 | 1 | — |
| 8 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
| 9 | Compression Spring -417 lbs/in | 1 | — |
| 10 | Rubber Damper | 1 | — |
| Item | Description | Quantity | Part Number |
| Q | Kit - Anti-Rotation, RR, UTV | 1 | 2205437 |
| 1 | Long Anti-Rotation Tubing Weldment | 1 | — |
| 2 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 1 | — |
| 3 | HFSCS, M12-1.75 x 50, 8.8, ZP, DIN6921 | 1 | — |
| 4 | X-Long Rod End | 1 | — |
| 5 | Rod End Spacer | 1 | — |
| 6 | Spacer Anti-Rotation | 1 | — |
| 7 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 8 | W, 37 x 13 x 3, ZP, DIN 9021 | 1 | — |
| 9 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
| 10 | Compression Spring, Long - 480 lbs/in | 1 | — |
| 11 | Rubber Damper | 2 | — |
| Item | Description | Quantity | Part Number |
| R | Kit-Hardware, Camoplast®, UTV | 1 | 2205128 |
| 1 | Back Plate | 1 | — |
| 2 | Steel Cap Nut | 1 | — |
| 3 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 4 | HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 8 | — |
| 5 | HCS, M10-1.5 x 45, 10.9, ZP, TL, DIN931 | 1 | — |
| 6 | HFCS, M8-1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 7 | HFSCS, M10-1.5 x 30, 10.9, ZP, TL, DIN6921 | 6 | — |
| 8 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 9 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 10 | Tandem T Bushing | 1 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 3 | — |
| 13 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 14 | FNN, M8-1.25, 8, ZP, DIN6926 | 1 | — |
| 15 | Urethane Cone | 2 | — |
| 16 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 17 | TW, 1-inch x 5/8-inch x 1/16-inch | 2 | — |
| Item | Description | Quantity | Part Number |
| S | Kit - Anti-Rotation, Bracket | 1 | 2205448 |
| 1 | Main Plate, Universal Anti-Rotation | 1 | — |
| 2 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 2 | — |
| 3 | W, 25 x 11 x 2, 8, ZP, USS | 4 | — |
| 4 | FNN, M10-1.5, 8, ZP, DIN69261 | 2 | — |
| 5 | Retainer, Anti-Rotation | 1 | — |
| Item | Description | Quantity | Part Number |
| T | Kit-Hardware, Anti-Rotation, Short | 1 | 2205449 |
| 1 | HCS, M10-1.5 x 60, 10.9, ZP, DIN931 | 1 | — |
| 2 | Rod End Spacer | 2 | — |
| 3 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 4 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
| Item | Description | Quantity | Part Number |
| U | Kit-Hardware, Anti-Rotation, Long | 1 | 2205450 |
| 1 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 1 | — |
| 2 | Rod End Spacer | 1 | — |
| 3 | Spacer, Anti-Rotation | 1 | — |
| 4 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 5 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
| Item | Description | Quantity | Part Number |
| V | Kit-Decals, Camoplast®, UTV | 1 | 2205453 |
| 1 | Sticker-Alignment | 1 | — |
| 2 | Sticker-Warning | 1 | — |
| 3 | Hub Cap Polaris Assembly | 1 | — |
| 4 | Sticker-Polaris UTV | 1 | — |
| Item | Description | Quantity | Part Number |
| W | Kit-Caps | 1 | 2205120 |
| 1 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 2 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 3 | 2 Lips Cap, 2-inch OD Tube | 12 | — |
| 4 | Dust Cap, Stabilizer | 1 | — |
| 5 | Hub Cap Polaris Assembly | 1 | — |
| Item | Description | Quantity | Part Number |
| X | Track-Camoplast®, Front, UTV | 1 | 5414846 |
| Item | Description | Quantity | Part Number |
| Y | Track-Camoplast®, Rear, UTV | 1 | 5414848 |
| Item | Description | Quantity | Part Number |
| Z | Kit-Cone Bushing, Camoplast®, UTV | 1 | 2205462 |
| AA | ERR, 35, 2.4, ZP, SHR-137 | 1 | 2205454 |
PROSPECTOR PRO Tracks (Part Number 2880758)
For more information, view the User Manual, which applies to multiple models. The User Manual includes installation instructions, adjustment procedures, break-in information, maintenance tips, torque specifications and troubleshooting solutions.
The following tables and diagrams list the parts included in the kits. Identification numbers and letters correspond to the diagrams above each table. To order a part or kit, see your Polaris Dealer.
Front left frame kit:
| Item | Description | Quantity | Part Number |
| A | Kit-Frame, Camoplast®, FL, UTV | 1 | — |
| 1 | LH Front Frame - UTV | 1 | — |
| 2 | Tensioner-UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8-1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12 - 24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8 - 1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker - Warning | 1 | — |
| 17 | Sticker - Polaris UTV | 1 | — |
| 18 | Track Guide Front - UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV MY 15 | 1 | 2205871 |
Front right frame kit:
| Item | Description | Quantity | Part Number |
| B | Kit-Frame, Camoplast®, FR, UTV | 1 | — |
| 1 | RH Front Frame - UTV | 1 | — |
| 2 | Tensioner - UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6 - 1 x 10, 10.9 ZP | 1 | — |
| 8 | HFCS, M8 - 1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12 - 24 x 1.5 ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8 - 1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker- Polaris UTV | 1 | — |
| 18 | Track Guide Front | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205871 |
Rear left frame kit:
| Item | Description | Quantity | Part Number |
| C | Kit-Frame, Camoplast®, RL, UTV | 1 | — |
| 1 | LH Rear Frame - UTV | 1 | — |
| 2 | Tensioner - UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6 - 1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8 - 1.25 x 70, 10.9 ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12 - 24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8- 1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker - Polaris UTV | 1 | — |
| 18 | Track Guide Rear - UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205871 |
Rear right frame kit:
| Item | Description | Quantity | Part Number |
| D | Kit-Frame, Camoplast®, RR, UTV | 1 | — |
| 1 | RH Rear Frame - UTV | 1 | — |
| 2 | Tensioner - UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6 - 1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8 - 1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12 - 24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8-1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker - Polaris UTV | 1 | — |
| 18 | Track Guide Rear - UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205871 |
18-tooth sprocket kit:
| Item | Description | Quantity | Part Number |
| E | Kit-Sprocket, Camoplast®, 18 Tooth | 1 | 2205433 |
| 1 | Sprocket-Camoplast® XP, 18 Tooth | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
20-tooth sprocket kit:
| Item | Description | Quantity | Part Number |
| F | Kit-Sprocket, Camoplast®, 20 Tooth | 1 | 2205432 |
| 1 | Sprocket-Camoplast® XP, 20 Tooth | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
32 mm hub kit:
| Item | Description | Quantity | Part Number |
| G | Kit-Hub, Camoplast®, 32 mm | 1 | 2205870 |
| 1 | Hub-Camoplast® XP HD 32 mm Assembly | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
| 3 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
Mid wheel kit:
| Item | Description | Quantity | Part Number |
| H | Kit-Wheel, Camoplast®, Mid, UTV | 1 | 2205127 |
| 1 | HD Wheel Assembly - 132 mm x 50 mm | 1 | — |
| 2 | Wheel Cap | 1 | — |
| 3 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 1 | — |
Idler wheel kit:
| Item | Description | Quantity | Part Number |
| i | Kit-Wheel, Camoplast®, Idler, UTV | 1 | 2205447 |
| 1 | Wheel Assembly | 1 | — |
| 2 | Wheel Cap | 1 | — |
| 3 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 1 | — |
Outer rocker kit:
| Item | Description | Quantity | Part Number |
| J | Kit-Rocker, Camoplast®, Outer, UTV | 1 | 2205446 |
| 1 | UTV Stabilizer Assembly Male | 1 | — |
| 2 | HD Wheel Assembly - 132 mm x 50 mm | 2 | — |
| 3 | Wheel Cap | 2 | — |
| 4 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 2 | — |
| 5 | Urethane Cone, Stabilizer | 1 | — |
Inner rocker kit:
| Item | Description | Quantity | Part Number |
| K | Kit-Rocker, Camoplast®, Inner, UTV | 1 | 2205126 |
| 1 | UTV Stabilizer Female Assembly | 1 | — |
| 2 | Dust Cap, Stabilizer | 1 | — |
| 3 | HCS, M10 - 1.5 x 45, 10.9, ZP, TL, DIN931 | 1 | — |
| 4 | Tandem T Bushing | 1 | — |
| 5 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 6 | Urethane Cone, Stabilizer | 1 | — |
| 7 | TW, 1-inch x 5/8-inch x 1/16-inch | 2 | — |
Bearing kit:
| Item | Description | Quantity | Part Number |
| L | Kit-Bearings, Camoplast®, UTV | 1 | 2205871 |
| 1 | Internal Spacer | 1 | — |
| 2 | Bearing - 6007 | 2 | — |
| 3 | Bearing - 6908 | 1 | — |
| 4 | Shaft Seal - 50 x 62 x 10 TC | 1 | — |
Track adjuster/tensioner kit:
| Item | Description | Quantity | Part Number |
| M | Kit-Track Adjuster, Camoplast®, UTV | 1 | 2205445 |
| 1 | Tensioner - UTV | 1 | — |
| 2 | 2 Lips Cap, 1-3/4-inch, OD Tube | 1 | — |
| 3 | Cap Nut | 1 | — |
| 4 | HFCS, M8 - 1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 5 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 6 | Tensioner Bushing | 1 | — |
| 7 | FNN, M8 - 1.25, 8, ZP, DIN6926 | 1 | — |
| 8 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 9 | Sticker-Alignment | 1 | — |
Front track guide kit:
| Item | Description | Quantity | Part Number |
| N | Kit-Hyfax, Camoplast®, Front, UTV | 1 | 2205443 |
| 1 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 2 | Track Guide Front | 1 | — |
Rear track guide kit:
| Item | Description | Quantity | Part Number |
| O | Kit-Hyfax, Camoplast®, Rear, UTV | 1 | 2205444 |
| 1 | SDSQWS, #12 - 24 x 1.5, ZP | 7 | — |
| 2 | Track Guide Rear | 1 | — |
Anti-rotation - front (stabilizing) arm kit:
| Item | Description | Quantity | Part Number |
| P | Kit - Anti-Rotation, FRT, UTV | 1 | 2205436 |
| 1 | Short Anti-Rotation Tubing Weldment | 1 | — |
| 2 | HCS, M10-1.5 x 60, 10.9, ZP, DIN931 | 1 | — |
| 3 | HFSCS, M12-1.75 x 50, 8.8, ZP, DIN6921 | 1 | — |
| 4 | X-Long Rod End | 1 | — |
| 5 | Rod End Spacer | 2 | — |
| 6 | W, 374 x 13 x 3, ZP, DIN9021 | 1 | — |
| 7 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 8 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
| 9 | Stabilizing Rod Spring | 1 | — |
| 10 | Rubber Damper | 1 | — |
Anti-rotation - rear (stabilizing) arm kit:
| Item | Description | Quantity | Part Number |
| Q | Kit - Anti-Rotation, Rear, UTV | 1 | 2205437 |
| 1 | Long Anti-Rotation Tubing Weldment | 1 | — |
| 2 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 1 | — |
| 3 | HFSCS, M12-1.75 x 50, 8.8, ZP, DIN6921 | 1 | — |
| 4 | X-Long Rod End | 1 | — |
| 5 | Rod End Spacer | 1 | — |
| 6 | Spacer Anti-Rotation | 1 | — |
| 7 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 8 | W, 374 x 13 x 3, ZP, DIN9021 | 1 | — |
| 9 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
| 10 | Compression Spring, Long - 480 lbs/in | 1 | — |
| 11 | Rubber Damper | 2 | — |
Hardware kit:
| Item | Description | Quantity | Part Number |
| R | Kit-Hardware, Camoplast®, UTV | 1 | 2205128 |
| 1 | Back Plate | 1 | — |
| 2 | Steel Cap Nut | 1 | — |
| 3 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 4 | HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 8 | — |
| 5 | HCS, M10-1.5 x 45, 10.9, ZP, TL, DIN931 | 1 | — |
| 6 | HFCS, M8-1.25 x 70, 10.9, ZP, TL, IFI536 | 1 | — |
| 7 | HFSCS, M10-1.5 x 30, 10.9, ZP, DIN6921 | 6 | — |
| 8 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 9 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 10 | Tandem T Bushing | 1 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 7/16 x 1.0 x 0.072, 8 ZP, USS | 3 | — |
| 13 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 14 | FNN, M8-1.25, 8 ZP, DIN6926 | 1 | — |
| 15 | Urethane Cone, Stabilizer | 2 | — |
| 16 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 17 | TW, 1-inch x 5/8-inch x 1/16-inch | 2 | — |
Anti-rotation bracket kit:
| Item | Description | Quantity | Part Number |
| S | Kit - Anti-Rotation, Bracket | 1 | 2205448 |
| 1 | Main Plate, Universal Anti-Rotation | 1 | — |
| 2 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 2 | — |
| 3 | W, 25 x 11 x 2, 8, ZP, USS | 4 | — |
| 4 | FNN, M10-1.5, 8, ZP, DIN69261 | 2 | — |
| 5 | Retainer, Anti-Rotation | 1 | — |
Anti-rotation short bolt kit:
| Item | Description | Quantity | Part Number |
| T | Kit-Hardware, Anti-Rotation, Short | 1 | 2205449 |
| 1 | HCS, M10-1.5 x 60, 10.9, ZP, DIN931 | 1 | — |
| 2 | Rod End Spacer | 2 | — |
| 3 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 4 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
Anti-rotation long bolt kit:
| Item | Description | Quantity | Part Number |
| U | Kit-Hardware, Anti-Rotation, Long | 1 | 2205450 |
| 1 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 1 | — |
| 2 | Rod End Spacer | 1 | — |
| 3 | Spacer Anti-Rotation | 1 | — |
| 4 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 5 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
Decals kit:
| Item | Description | Quantity | Part Number |
| V | Kit-Decals, Camoplast®, UTV | 1 | 2205453 |
| 1 | Sticker-Alignment | 1 | — |
| 2 | Sticker-Warning | 1 | — |
| 3 | Hub Cap Polaris Assembly | 1 | — |
| 4 | Sticker - Polaris UTV | 1 | — |
Caps kit:
| Item | Description | Quantity | Part Number |
| W | Kit-Caps | 1 | 2205120 |
| 1 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 2 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 3 | Wheel Cap | 12 | — |
| 4 | Dust Cap, Stabilizer | 1 | — |
| 5 | Hub Cap Polaris Assembly | 1 | — |
Front track:
| Item | Description | Quantity | Part Number |
| X | Track - Camoplast®, Front, UTV | 1 | 5414846 |
Rear track:
| Item | Description | Quantity | Part Number |
| Y | Track - Camoplast® | 1 | 5414848 |
Cone bushing kit:
| Item | Description | Quantity | Part Number |
| Z | Kit-Cone Bushing, Camoplast®, UTV | 1 | 2205462 |
| AA | ERR, 35, 2.4, ZP, SHR-137 | 1 | 2205454 |
Camoplast® is a registered trademark of Camoplast Solideal Inc.
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2021 Polaris Inc.
