Skip to content Skip to navigation Skip to footer
POLARIS OFF-ROAD VEHICLES
HELP CENTER
12/14/2021

Installing a Winch on a RANGER XP 900

The Polaris Pro HD 4,500-Pound Winch with Rapid Rope Recovery is part number 2882236. For more information, view the installation instructions

Watch the video or follow the instructions below to install the Polaris Pro HD 4,500-Pound Winch with Rapid Rope Recovery. 

The installation of a Polaris PRO HD Winch with Rapid Rope Recovery on your RANGER XP 900 includes the following steps:

  • Preparation (:37)
  • Removing the passenger seat (:46)
  • Removing the passenger seat storage tub (1:00)
  • Disconnecting the battery (1:05)
  • Removing the hood (1:43)
  • Removing the center floor section (1:53)
  • Removing the front bumper assembly (2:23)
  • Routing cables (3:30)
  • Installation of the winch contactor (5:27)
  • Connecting cables (6:28)
  • Installation of the winch onto the mounting bracket (9:08)
  • Installation of the winch assembly (10:25)
  • Connecting cables (11:58)
  • Installation of the autostop fairlead (14:48)
  • Reinstallation of the front bumper assembly (16:25)
  • Installation of the rubber stop magnet (17:35)
  • Mounting the wireless remote receiver (19:20)
  • Routing and securing wires (21:10)
  • Installation of the control box (25:40)
  • Mounting the wireless remote (26:19)
  • Inspecting the wiring (27:15)
  • Reinstallation of the center floor section (27:42)
  • Reconnecting the battery (28:09)
  • Reinstallation of the passenger seat storage tub (29:38)
  • Reinstallation of the passenger seat (29:44)
  • Reinstallation of the hood (30:00)
  • Testing the operation of the winch and wireless remote (30:09)

View the full line of Polaris winches to learn more or visit your local Polaris Dealer. To find a dealer near you, use the Dealer Locator.

YouTube® is a registered trademark of Google Inc. 

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2021 Polaris Inc.