Listed below are the parts that make up the windshields for Polaris RANGER vehicles. Included are diagrams and the part numbers for spare part kits. Each diagram and parts listing is specific to that particular windshield.
To order a replacement part for your windshield, see your authorized Polaris Dealer. If you need a part not listed, also consult your Polaris Dealer. To determine if a windshield fits your RANGER, visit the Accessories section of the RANGER website.
Lock & Ride Full Tip-Out Windshield - Glass (Part Number 2889031)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, as well as their part numbers and the hardware kits they can be found in. Identification numbers correspond to the above diagram. To order a part or a spare kit, see your Polaris Dealer.
Item | Description | Quantity | Part Number | Hardware Kit |
1 | Windshield, Tip-Out Glass (includes items 1.1-1.9) |
1 | — | — |
1.1 | Screw, Hex Flange, with Locking Patch - M6 x 1.0 x 16 | 2 | 7519236 | — |
1.2 | Nut, Hex, M6 x 1.0 | 2 | 7546701 | — |
1.3 | Nut, Hex, Locking - M6 x 1.0 | 1 | 7546704 | — |
1.4 | Screw, Hex Flange - M6 x 1.0 x 145 | 1 | 7516816 | — |
1.5 | Nut, Hex - M6 x 1.0 | 1 | 7547120 | 2207450 |
1.6 | Washer - 6 x 23 x 2.0 | 1 | — | 2207450 |
1.7 | Receiver, Handle | 1 | — | 2207450 |
1.8 | Handle | 1 | — | 2207450 |
1.9 | Screw, Pivot - M6 | 1 | — | 2207450 |
2 | Seal, Adhesive, LH | 1 | 5814712 | — |
3 | Seal, Adhesive, RH | 1 | 5814713 | — |
4 | Screw, TORX® Truss Head - M6 x 1.0 x 25 | 3 | 7519650 | — |
5 | Base, Handle | 1 | — | — |
6 | Bracket, Backer, Handle Base | 1 | — | — |
7 | Screw, Hex Flange - M8 x 1.25 x 20 | 2 | 7518555 | — |
8 | Fitting, Ball End | 4 | 7081839 | 2207158 |
9 | Nut, Hex Flange, Locking - M8 x 1.25 | 8 | 7547454 | 2207158 (Qty 4) 2207159 (Qty 4) |
10 | Shock, Gas | 2 | 7043889 | 2207158 |
11 | Hinge, Vehicle Side, LH Hinge, Vehicle Side, RH |
1 1 |
— — |
2207159 2207159 |
12 | Screw, TORX® Button Head - M8 x 1.25 x 25 | 4 | 7519747 | 2207159 |
Lock & Ride Full Windshield - Glass (Part Number 2889030)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, as well as their part numbers. Identification numbers correspond to the above diagram. To order a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number |
1 | Windshield, Glass (includes items 1.1-1.2) | 1 | — |
1.1* | Handle | 4 | 5452533 |
1.2* | Nut, Hex Flange - M8 x 1.25 | 4 | 7547454 |
2 | Seal, Adhesive, RH | 1 | 5814713 |
3 | Seal, Adhesive, LH | 1 | 5814712 |
Lock & Ride Full Vented Windshield - Hard Coat Poly (Part Number 2883266), Lock & Ride Full Windshield - Hard Coat Poly (Part Number 2883300), Lock & Ride Full Windshield - Poly (Part Number 2883278)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kits, as well as their part numbers. Identification numbers correspond to the above diagram. Kit 2883266 is pictured. Kits 2883278 and 2883300 are similar except as noted below. To order a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number |
1 | Windshield, Poly, Vented (kit 2883266; includes items 1.1-1.2) Windshield, Poly, General Purpose (kit 2883278; includes item 1.1) Windshield, Poly, Hard Coat (kit 2883300; includes item 1.1) |
1 1 1 |
— — — |
1.1 | Clamp Assembly | 4 | 2636989 |
1.2 | Vent (kit 2883266 only) | 2 | 2636990 |
2 | Seal, Adhesive, LH | 1 | 5814712 |
3 | Seal, Adhesive, RH | 1 | 5814713 |
Lock & Ride Full Flip-Down Windshield - Hard Coat Poly (Part Number 2884139)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, as well as their part numbers and which hardware kit that replacements can be found in. Identification numbers correspond to the above diagram. To order a part or kit, see your Polaris Dealer.
Item | Description | Quantity | Part Number | Hardware Kit |
1 | Windshield, Tip-Down (includes item 1.1-1.4) | 1 | 2636974 | — |
1.1 | Hinge (includes one each LH and RH) | 1 | — | 2207475 |
1.2 | Screw, TORX® Truss Head - 10-12 x 3/4 | 2 | — | 2207475 |
1.3 | Clamp Assembly | 2 | 2639689 | — |
1.4 | Seal, 3/8 Inch Side Bulb with 0.177 inch Carrier (4.25 ft) | — | — | 2207476 |
2 | Screw, Socket Button Head - M6 x 1.0 x 20 | 2 | — | — |
3 | Bracket, Visor | 2 | — | 2207475 |
4 | Nut, Hex Flange, Locking - M6 x 1.0 | 2 | — | — |
5 | D-seal, 0.625 x 0.625, Adhesive (3 ft) | — | — | 2207476 |
6 | Rivet, Push Pin - 8 x 29 (long) | 6 | — | 2207475 |
7 | Rivet, Push Pin (short) | 2 | — | — |
8 | D-seal, 0.375 x 0.31, adhesive (1.17 ft) | — | — | 2207476 |
9 | Bracket, Hinge, LH | 1 | — | 2207475 |
10 | Nut, Hex Flange, Locking- M8 x 1.25 | 2 | — | — |
11 | Screw, Socket Button Head - M8 x 1.25 x 20 | 2 | — | — |
12 | Seal, Adhesive, LH | 1 | 5814712 | — |
13 | Bracket, Windshield Hold-Down, LH | 1 | — | 2207475 |
14 | Backer Plate, Windshield Hold-Down Bracket | 2 | — | 2207475 |
15 | Nut, Hex Flange, Locking - M5 | 4 | — | — |
16 | Seal, Adhesive, RH | 1 | 5814713 | — |
17 | Bracket, Windshield Hold-Down, RH | 1 | — | 2207475 |
18 | Bracket, Hinge, RH | 1 | — | 2207475 |
Tip-Out Full Windshield - Glass (Part Number 2882189)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, including part numbers and which hardware kits that spare parts are available in. Identification numbers correspond to the above diagram. To order a part or a kit, see your Polaris Dealer.
Item | Description | Quantity | Part Number | Hardware Kit |
1 | Windshield, Tip-Out Glass | 1 | — | — |
2 | Nut, Hex Flange, Locking - M8 x 1.25 | 8 | 7547454 | 2207158 (qty 4) 2207158 (qty 4) |
3 | Fitting, Ball - M8 x 1.25 | 4 | 7081839 | 2207158 |
4 | Shock | 2 | 7043889 | 2207158 |
5 | Handle | 1 | 5452827 | — |
6 | Screw, TORX® Pan Head, 8-32 x 1/2 | 2 | 7511866 | 2207157 |
7 | Pin, Pivot | 2 | 7519743 | 2207157 |
8 | Spring, Handle, LH Spring, Handle, RH |
1 1 |
7043895 7043894 |
2207157 2207157 |
9 | Screw, Hex Flange - M6 x 1.0 x 20 | 2 | 7518529 | — |
10 | Backing Bracket | 1 | 5264353 | 2207157 |
11 | Screw, TORX® Truss Head - M6 x 1.0 x 25 | 4 | 7519650 | 2207157 |
12 | Base, Handle | 1 | 5454227 | 2207157 |
13 | Hinge, Vehicle Side, LH Hinge, Vehicle Side, RH |
1 1 |
5633878 5633879 |
2207159 2207159 |
14 | Hinge, Windshield Side, LH Hinge, Windshield Side, RH |
1 1 |
— — |
— — |
15 | Screw, TORX® Truss Head - M6 x 1.0 x 16 | 6 | — | — |
16 | Screw, TORX® Button Head - M8 x 1.25 x 25 |
4 | 7519747 | 2207159 |
17 | Seal, Adhesive, LH | 1 | 5814712 | — |
18 | Seal, Adhesive, RH | 1 | 5814713 | — |
Flip-Down Full Windshield - Hard Coat Poly (Part Number 2881919)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, as well as the hardware kit they can be found in. Identification numbers correspond to the above diagram. To order a part or kit, see your Polaris Dealer.
Item | Description | Quantity | Hardware Kit |
1 | Windshield Panel, Upper | 1 | — |
2 | Windshield Panel, Lower | 1 | — |
3 | Trim Panel, Upper | 1 | — |
4 | D-seal - 3/8 wide x 5/16 thick x 18 in long (9.6 x 8.0 x 457 mm) |
— | 2206302 |
5 | D-seal - 5/8 wide x 5/8 thick x 38.4 in long (15.9 x 15.9 x 975 mm) |
— | 2206302 |
6 | Slot Clamp | 2 | 2206302 |
7 | Bracket, ROPS Mounting, RH | 1 | 2206302 |
8 | Bracket, ROPS Mounting, LH | 1 | 2206302 |
9 | (unused) | — | — |
10 | Insert, ROPS Mounting Bracket | 2 | 2206302 |
11 | Protective Tape | 1 | 2206302 |
12 | Rivet, Push Pin | 12 | 2206302 |
13 | Screw, Button Head Socket - M6 x 1.00 x 16 | 2 | 2206302 |
14 | Nut, Flange, Locking - M6 x 1.00 | 2 | 2206302 |
15 | Washer, Fender - 1.5 x 0.25 x 0.059 | 2 | 2206302 |
16 | Screw, Button Head Socket - M8 x 1.25 x 20 | 2 | 2206302 |
17 | Nut, Locking - M8 x 1.25 | 2 | 2206302 |
18 | Strap, Windshield Locking | 1 | 2206302 |
The LH Clamp is part number 5439876. The RH Clamp is part number 5439877. To order a part, see your Polaris Dealer.
Lock & Ride Full Tip-Out Windshield - Poly (Part Number 2880091)
For more information, view the installation instructions.
The windshield kit includes the following parts:
1 Left Hinge Bracket
1 Right Hinge Bracket
6 M8 x 25 mm Screws
6 M8 Fender Washers
6 M8 Flange Nuts
1 Pin Adjustment Bracket
2 10 mm Ball Studs
2 5/16-inch Lock Washers
2 5/16-inch Hex Nuts
2 Gas Shocks
Available spare parts include: Handle Rubber Grommet (part number 5439913), Handle (part number 5451292), Windshield Rubber Grommet (5415090), Gas Shock (part number 7043889) and Handle Pivot Pin (part number 7519743). To order a part, see your Polaris Dealer.
The replacement support shock (part number 7043889) looks different than the original but is correct. Both are pictured below.
Lock & Ride Full Tip-Out Windshield - Glass (Part Number 2881784)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, as well as their part numbers. Identification numbers correspond to the above diagram. To order a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number |
1 | Windshield Weldment Tip, Lower Shock Mount | 2 | 1020777 |
2 | Windshield Glass Assembly, Tip-Out | 1 | 2635418 |
3 | Detent Assembly, Lock & Ride, Windshield | 2 | 2688412 |
4 | Hinge Bracket, LH, Tip-Out | 1 | 5259767 |
5 | Hinge Bracket, RH, Tip-Out | 1 | 5259768 |
6 | Windshield Bushing, 12 mm OD x 8 mm ID | 4 | 5451523 |
7 | Tip-Out Handle, LH | 1 | 4541524 |
8 | Tip-Out Handle, RH | 1 | 5451525 |
9 | Base Grommet, Window Mount | 2 | 5522061 |
10 | Gas Shock, Tip-Out | 2 | 7043889 |
11 | Ball, End, M8 x 1.25 | 4 | 7081839 |
12 | Screw - HXFL - M8 x 1.25 x 20 10.9 ZPB | 4 | 7517838 |
13 | Screw - M8 x 1.25 x 70 8.8 HH ZOD | 2 | 7518992 |
14 | Screw - TXBH - M8 x 1.25 x 25 8.8 ZPB | 4 | 7519747 |
15 | Nut - HXFL - M8 x 1.25 8 ZB3 Nyloc | 10 | 7547454 |
16 | Washer - 8.4 x 16.0 x 1.6 | 4 | 7556043 |
Fixed Windshield - Glass (Part Number 2881783)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, as well as their part numbers. Identification numbers correspond to the above diagram. To order a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number |
1 | Lock & Ride Windshield Assembly, Base | 1 | 2635316 |
2 | Detent Assembly, Lock & Ride, Windshield | 4 | 2685412 |
3 | Lock & Ride Windshield Clamp, LH | 2 | 5439876 |
4 | Lock & Ride Windshield Clamp, RH | 2 | 5439877 |
5 | Nut - HXFL - M8 x 1.25 8 ZB3 Nyloc | 4 | 7547454 |
Flip-Down Windshield - Hard Coat Poly (Part Number 2882178)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, as well as which hardware kit replacements can be found in. Identification numbers correspond to the above diagram. To order a part or kit, see your Polaris Dealer.
Item | Description | Quantity | Hardware Kit |
1 | Windshield, Upper | 1 | — |
2 | Tape, Foam - 1/8 in x 1 in x 3.75 ft | — | 2206449 |
3 | Visor Panel | 1 | — |
4 | Bracket, Visor Panel, LH | 1 | — |
5 | Bracket, Visor Panel, RH | 1 | — |
6 | Screw, Socket Head Cap - M6 x 1.0 x 16 | 2 | 2206449 |
7 | Washer, Fender - 1/4 | 2 | 2206449 |
8 | Nut, Hex Flange - M6 x 1.0 | 2 | 2206449 |
9 | Hinge, LH | 1 | 2206449 |
10 | Hinge, RH | 1 | 2206449 |
11 | Washer, Fender - 1/4 | 2 | — |
12 | Screw, TORX® - 10-12 x 3/4 | 2 | 2206449 |
13 | D-seal, Wide (3.3 ft; cut as required) | — | 2206449 |
14 | Windshield Lower | 1 | — |
15 | D-seal, Narrow (2.5 ft; cut as required) | — | 2206449 |
16 | Tape, Wear Protection | 1 | — |
17 | Nut, Hex Flange - M8 x 1.25 | 4 | 2206449 |
18 | Insert, Bracket | 2 | 2206449 |
19 | Screw, Hex Flange - M8 x 1.25 x 20 | 4 | 2206449 |
20 | Bracket, LH | 1 | — |
21 | Bracket, RH | 1 | — |
22 | Rivet, Push Pin | 10 | 2206449 |
23 | Strap, Latch | 1 | 2206449 |
24 | Slot Clamp, Rubber | 2 | 2206449 |
Lock & Ride Vented Windshield - Hard Coat Poly (Part Number 2883342), Windshield - Poly (Part Number 2883318) and Lock & Ride Full Windshield -Hard Coat Poly (Part Number 2883319)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kits. Kit 2883342 is shown. Kits 2883318 and 2883319 are similar except as noted below. Identification numbers correspond to the above diagram. To purchase a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number |
1 | Windshield, Poly, Vented (kit 2883342 only; includes items 1.2 and 1.3) Windshield, Poly, General Purpose (kit 2883318 only; includes item 1.2) Windshield, Poly, Hard Coat (kit 2883319 only; includes item 1.2) |
1 1 1 |
— — — |
1.1 | Clamp Assembly | 4 | 2636989 |
1.2 | Vent (kit 2883342 only) | 2 | 2636990 |
Lock & Ride Full Tip Out Windshield - Poly (Part Number 2879959)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kit, as well as their part numbers. Identification numbers correspond to the above diagram. To order a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number |
1 | Lower Shock Mount, Windshield Tip Weldment | 2 | 1020777 |
2 | Tip Out Polycarbonate Assembly, Base | 1 | — |
3 | Hinge Bracket, LH Tip Out | 1 | 5259767 |
4 | Hinge Bracket, RH, Tip Out | 1 | 5259768 |
5 | Windshield Bushing, 12 mm OD x 8 mm ID | 4 | — |
6 | Grommet, Window Base Mount | 2 | — |
7 | Gas Shock, Tip Out | 2 | 7043889 |
8 | End Ball, M8 x 1.25 | 4 | 7081839 |
9* | Screw - HXFL - M8 x 1.25 x 20 10.9 ZPB | 4 | 7517838 |
10* | Screw - M8 x 1.25 x 70 8.8 HH ZOD | 2 | 7518992 |
11* | Screw - TXBH - M8 x 1.25 x 25 8.8 ZPB | 4 | 7519747 |
12* | Nut - HXFL - M8 x 1.25 8 ZBD Nyloc | 8 | 7547454 |
13* | Washer - 8.4 x 16.0 x 1.6 | 4 | 7556043 |
* Denotes items included in hardware kit 2205482
Hard Coat Poly Windshield (Part Number 2879489)
For more information, view the installation instructions.
The following parts are included in the windshield kit. Identification numbers correspond to the above diagram. To order a part, see your Polaris Dealer.
1. Lower Windshield x 1
2. Upper Windshield x 1
3. Foam trim x 1
4. Sealing Joint of the Lower Windshield x 1
5. Sealing Joint of the Upper Windshield x 1
6. M8 x 25 mm TORX® Button Head Cap Screw x 12
7. M8 Fender Washer x 8
8. M8 Flat Washer x 8
9. M8 Hexagonal Locknut x 12
10. 1.75-inch P-clamp x 8
The P-clamp is available in Hardware Kit (part number 2876192H). Other kits containing spare parts are the Full Poly Windshield Hardware Kit (part number 2876959H) and two Trim Kits (part number 2857781 and part number 2857782).
Poly Windshield (Part Number 2876958)
For more information, view the installation instructions.
The windshield kit includes the following parts:
Lower Windshield Assembly x 1
Upper Windshield Assembly x 1
1/4-20 x 1.00-inch Screws x 17
1/4 Flat Washers x 8
1/4 Fender Washers x 13
1/4-20 Nylon Lock Nuts x 17
Rubber Coated Clamps x 13
To order a part or the Full Poly Windshield Hardware Kit (part number 2876959H), see your Polaris Dealer. This windshield originally had 13 clamps but now is an eight-clamp-style windshield.
Lock & Ride Half Windshields - Poly (Part Number 2883301 and Part Number 2883320)
For more information on kit 2883301 (XP 1000, XP 900 and Diesel models), view the installation instructions. For more information on kit 2883320 (570, 500 and EV models), view the installation instructions.
The following table lists the parts included in the windshield kits, as well as their part numbers. Identification numbers correspond to the above diagram. To order a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number |
1 | Windshield, Poly, Half (includes item 1.1) | 1 | 2636977 |
1.1 | Clamp Assembly | 2 | 2636989 |
Lock & Ride Full Windshield - Hard Coat Poly (Part Number 2879108)
For more information, view the installation instructions.
The windshield kit includes:
1 Windshield
12 TORX® Screws
4 Full Snap Clamps
2 Half Snap Clamps
5 Feet Adhesive Foam Seal
The side clamps are part number 2878747. They are sold individually, not in pairs, and include one clamp and two screws. The screws are part number 7519359.
Lock & Ride Half Windshield - Poly (Part Number 2878756)
For more information, view the installation instructions.
The windshield kit includes:
1 Windshield
4 Clamps
8 Screws
2 Trim
A replacement Lock & Ride clamp is part number 2878747. That kit includes one clamp and two screws. The screws for the clamp are part number 7519359. To order a part or kit, see your Polaris Dealer.
RANGER 150 Full Windshield - Poly (Part Number 2883288)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kits, as well as their part numbers and which hardware kits replacements can be found in. Identification numbers correspond to the above diagram. To order a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number | Hardware Kit |
1 | Windshield - Full | 1 | 5814689 | — |
2 | P-Clamp, 1.5-Inch Rubber Dipped | 4 | 7082439 | 2207357 |
3 | Screw - M6 x 1.0 x 20 | 4 | — | 2207357 |
4 | Washer - M6 Flat | 4 | — | 2207357 |
5 | Locking Nut - M6 x 1.0 | 4 | — | 2207357 |
6 | Hardware Kit | 1 | 2207357 | — |
7 | Seal, Windshield | 1 | 5416740 | 2207357 |
RANGER 150 Half Windshield - Poly (Part Number 2883298)
For more information, view the installation instructions.
The following table lists the parts included in the windshield kits, as well as their part numbers and which hardware kits replacements can be found in. Identification numbers correspond to the above diagram. To order a part, see your Polaris Dealer.
Item | Description | Quantity | Part Number | Hardware Kit |
1 | Windshield - Half | 1 | 5814690 | — |
2 | P-Clamp, 1.5-Inch Rubber Dipped | 4 | 7082439 | 2207357 |
3 | Screw - M6 x 1.0 x 20 | 4 | — | 2207357 |
4 | Washer - M6 Flat | 4 | — | 2207357 |
5 | Locking Nut - M6 x 1.0 | 4 | — | 2207357 |
6 | Hardware Kit | 1 | 2207357 | — |
7 | Seal, Windshield | 1 | 5416740 | 2207357 |
TORX® is a registered trademark of Acument Intellectual Properties, LLC.